Form #SPC28-1103N
© 2003 Berkel Company
Litho in U.S.A.
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Automatic Gravity F
eed Slicer
Model 919M
Model 919M
Automatic Gravity Feed Slicer
Specifications
Motor:
1-speed, 1/2 HP, totally enclosed, permanently
lubricated ball bearings, thermally protected.
Carriage:
1-speed, automatic carriage produces 50
slices per minute.
Electrical:
Furnished in 115/60/1, 4.5 amp, AC, ETL
listed. Also available in 1/3 HP, 220/60/1, 2.4 amp, AC,
ETL listed. Low 12/5 VDC circuitry for added operator
protection.
Finish/construction:
All food contact areas are
stainless steel including the pusher, gauge plate,
product table, center plate and knife; sanitary bur-
nished aluminum ring guard and one-piece base with
non-slip feet. Slicer disassembles quickly without tools
for easy cleaning.
Knife:
Nominal 12-1/2” (318 mm) diameter, hollow
ground, hardened and polished forged stainless steel.
Cutting Capacity:
Carriage handles food up to 11”
(280 mm) wide by 6” (152 mm) high or 8” (203 mm)
diameter.
Slice Thickness:
Precision gear system with eccentric
gear to prevent backlash, provides infinite slice adjust-
ment and consistent cuts of hard or soft foods from tissue
thin to 27/32” (21 mm).
Full Gravity Feed:
Full 45
° angle feed requires less
mechanical pressure. Equipped with rear-mounted,
stainless steel meat pusher that runs the entire
length of the product table to hold product and
minimize waste. An optional screw-in weight is also
available. Ergonomic style handle for ease of use.
Knife Sharpener:
Built-in, top-mounted, two stone,
single lever, dual-action system for a lasting, razor-sharp
edge. Unit is removable and submersible for easy
cleaning.
Model No. Cutting
Slice
Knife
Slicing
Product Dimensions
Capacity
Thickness
Diameter
Speed
Width A
Depth B
Height C
919M
11” (280 mm) wide
to 27/32”
12-1/2”
50 SPM
20”
29”
24”
6” (152 mm) high
(21 mm)
(318 mm)
(508 mm)
(737 mm)
(610 mm)
8” (203 mm) dia.
Motor Electrical Weight
Box Dimensions
Width
Depth
Height
1-speed 115/60/1
Net 114 lbs. (52 kg)
32”
30”
30”
1/2 HP
Ship 152 lbs. (69 kg)
(813 mm)
(762 mm)
(762 mm)
No-Volt Release:
Prevents activation of the slicer in the
event of a power interruption; operator must restart the slicer.
Center Plate Interlock:
Deactivates the slicer when the
center plate is removed. Slicer will not run.
Knife Ring Guard:
Permanent, tapered guard covers non-
slicing portion of knife edge even when the sharpener and
center plate are removed.
On/Off Switch:
Highly reliable, moisture resistant, on/off
switch and power light.
Q-P-Q Nickel Plated Transport Slide Rod with Reser-
voir Wick:
E-nickel plated rod undergoes Q-P-Q impregna-
tion increasing the lubricity of the stainless steel reducing
wear propertied of the rod and bushings.
Cord and Plug:
Attached 6-foot flexible 3-wire cord and
plug for grounded receptacle.
Warranty:
All parts, service and travel coverage for one
year, exclusive of wear items.
As we continually strive to improve our products, specifications
are necessarily subject to change without notice.
A
B
C
