Knife Ring Guard:
Permanent, tapered knife guard
covers non-slicing portion of knife edge even when
the sharpener and center plate are removed.
No-Volt Release:
Prevents activation of the slicer in
the event of a power interruption; operator must
restart the slicer.
On/Off Switch:
Highly reliable, moisture resistant,
on/off switch and power light.
Q-P-Q Nickel Plated Transport Slide Rod with
Reservoir Wick:
E-nickel plated rod undergoes Q-P-Q
impregnation increasing the lubricity of the stainless
steel reducing wear properties of the rod & bushings.
Cord and Plug:
Attached 6-foot, flexible, 3-wire cord
and plug for grounded receptacle.
Warranty:
All parts, service and travel coverage for
one year, excluding wear items.
As we continually strive to improve our products, specifications
are necessarily subject to change without notice.
Form #SPC07-0902N
Made in the U.S.A.
© 2002 Berkel Company Litho in U.S.A.
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berk
el.com
Automatic Gravity Feed Slicer
Model 919E
Model 919E
Automatic Gravity Feed Slicer
A
B
C
Specifications
Motor:
1-speed, 1/2 HP, totally enclosed, perma-
nently lubricated ball bearings, thermally protected.
Carriage:
1-speed, automatic carriage produces 50
slices per minute.
Electrical:
Furnished in 115/60/1, 4.5 amp, AC,
ETL listed. Also available in 1/3 HP, 220/60/1, 2.4
amp, AC, ETL Listed. Low 12/5 VDC circuitry for
added operator protection.
Finish/construction:
All food contact areas are
stainless steel including the pusher, gauge plate,
product table, center plate and knife; sanitary
burnished aluminum ring guard and one-piece base
with non-slip feet. Slicer disassembles quickly
without tools for easy cleaning.
Knife:
Nominal 12-1/2” (318 mm) diameter,
hollow ground, hardened and polished forged
stainless steel.
Cutting Capacity:
Carriage handles food up to 11”
(280 mm) wide by 6” (152 mm) high or 8” (203
mm) diameter.
Slice Thickness:
Precision gear system with
eccentric gear to prevent backlash, provides infinite
slice adjustment and consistent cuts of hard or soft
foods from tissue thin to 27/32” (21 mm).
Full Gravity Feed:
Full 45
°
angle feed requires
less mechanical pressure. Equipped with a rear-
mounted, stainless steel meat pusher that runs
the entire length of the product table to hold
product and minimize waste. An optional screw-in
weight is also available. Ergonomic style handle
for ease of use.
Knife Sharpener:
Built-in, top-mounted, two
stone, single lever, dual-action system for a
lasting, razor-sharp edge. Unit is removable and
submersible for easy cleaning.
Model No. Cutting Slice Knife Slicing Product Dimensions
Capacity Thickness Diameter Speed
Width A Depth B Height C
919E
11” (280 mm) wide to 27/32” 12-1/2” 50 SPM 20” 29” 24”
6” (152 mm) high (21 mm) (318 mm) (508 mm) (737 mm) (610 mm)
8” (203 mm) dia.
Motor
Electrical
Weight
Box Dimensions
Width
Depth
Height
1-speed
115/60/1
Net 114 lbs. (52 kg)
32”
30”
30”
1/2 HP
Ship 152 lbs. (69 kg)
(813 mm)
(762 mm)
(762 mm)