Remedy Maker
We will now take a look at what you can use Spooky Radionics for and the procedure
involved. First of all we will outline the steps for making an energy medicine remedy.
You can use the Spooky database here to program Rife based frequencies into your
remedy or you can simply set a base frequency on your generator 7.83Hz Schumann is a
good start. For the purposes of this introduction we will look at creating a remedy for
nausea using an essential oil and the Spooky database.
1. Power up the Spooky generator and software as described in the Spooky Manual,
and connect a BNC cable for the generators OUT1 to Spooky Radionics Input
socket.
2. From the Spooky database type in nausea/sickness and select all the frequencies
you wish to use. For the waveform use a sine wave, set amplitude to 20V. No need
to alter offset, duty or phase, these all stay as default. Do not set the frequency’s to
run just yet. You need to prepare your remedy first.
3. Use a clean glass vial or dropper bottle to make up your remedy in. These can
easily be found on Ebay at a good price or from homeopathic suppliers. You must
used a sealed bottle to make the remedy in otherwise you could risk shorting the
circuit if it is spilled. Fill the bottle up with pure distilled water and add a few drops of
grain alcohol to preserve the remedy. If you do not intend to store the remedy you
may omit the alcohol. Place the sealed bottle on the output plate of your radionics
machine.
4. Ginger is commonly used for combating nausea, and sickness so you can place a
sealed bottle of ginger essential oil on the input plate, or fresh ginger in a sample
bottle.
5. Return to the spooky software and run the frequencies. The LED on the radionics
device will light up indicating that the frequencies are passing through the machine.
While the Spooky set is running it will be transferring the substance of the object on
the input plate to the blank sample on the output plate, this is called imprinting and
the result will be a remedy that contains the energetic signature of the ginger
essential oil and the various rife frequencies you are using to drive the device.
6. Leave this to run until at least the first full set of frequencies have been cycled
through. If you are using only one frequency then a minute run time is okay.
Personally I prefer to run for as long as I can as it ensures the blank water sample
has reached saturation point.
That's a simple method of making a remedy. The same process can be used to copy
remedies as well. To copy replace the oil with a remedy, and imprint to a new blank
sample. Instead of water you may find sugar pills useful. However, we find that water is the
most impressionable substance. Do remember that it has a shelf life and should be used
as soon as it is made. If you omit the alcohol the water will eventually degrade and be
unusable. Of course ginger is just an example. If you wish to just use frequencies then
nothing needs to be placed on the input plate. Many other remedies can be created.
Содержание Spooky Radionics
Страница 1: ...Spooky Radionics Operation Manual...
