Bergstrom SLIM FIT, Руководство пользователя, Страница: 9 / 32

EN
SLIM FIT
9
1.- On/off switch on /off the unit and functioning selection mode.
2.- Indicate the compressors functioning.
3.- Display: Screen where it shows the slected functioning and condition of the unit.
4.- Temperature selectors : To select the surrounding temperature and the blower speed
(this only in manual mode) , remote control programmation and Fahrenheit degrees.
• When you connect, the engine make leds control and you can read 88--SC on the display
and the engine swith off.
Remote control functions:
Switching on /off of equipment.
Blower speeds control.
Temperature control.
How to activate remote control:
In order to activate remote control, while equipment is switched off, push key
-
from control
panel until
C
C
flashes on display. When it stops flashing, push the On/off key on in the remote
control. You will have to do it within 30 seconds or else you will have to repeat the whole
operation.
Control panel
Remote control
1
2
3
1
2
3
Special messages on the display (
please see Troubleshooting
):
Lb
: Low battery.
EO :
Poor contact of the return air sensor cables, or return air sensor faulty.
E2 :
Condenser fan or centrifugal blower failure.
E9 :
Compressor protection (cabin tilted).
ºC
ºF
TEMP
ON/OFF
+
-
2
3
1
4