12 in 1 Steam Cleaner Max
H008
Instructions for Use
Please read and retain these instructions for future reference
v001: 24/08/20
Page No. 21
The steam cleaner uses tap water. However, in areas with hard water, distilled water should be used for
better performance.
To remove lime scale from the steam cleaner, please follow these procedures:
By using scraper
1.
Make sure that the steam cleaner is disconnected from the power supply before
maintenance.
2.
Use the cleaning pin to remove scale deposits from the small hole of the steam
outlet in the main body, as illustrated. By swirling and pushing the pin up and
down you will clean the steam outlet. Always ensure that all scale debris has been removed from the
steam outlet before reassembling. Continue swirling cleaning pin until no further debris is evident.
By using cleaning solution
1.
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2.
Secure and position the unit to ensure steam released is aimed away from the floor or surrounding
objects and surfaces. Plug the unit in, turn the unit ON by pressing the power switch (O/I) and allow the
unit to produce steam until the vinegar/water solution is used up.
3.
Repeat the above procedure as many times as necessary until a normal steam flow rate is achieved.
4.
Fill the water tank with fresh water and rinse out.
5.
Fill the water tank with fresh water, attach to the unit and release steam through the system until the
water tank is empty.
WARNING
Do not leave the steamer unattended during the lime scale removal process and/or while in use.
NOTICE
Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that there is no
debris left in the system.
