Waterproof CD Radio Player
K266
Instructions for Use
Please read and retain these instructions for future reference
v001: 15/11/21
by DRM)
•
This unit supports USB versions 1.1 and 2.0.
•
The unit can support USB devices with up to 32GB of memory.
•T
he unit may not be compatible with all USB devices and memory cards, this is not an indication of a
problem with the unit.
FM OPERATION
To switch the unit to
FM
mode, press the
SOURCE
button to switch to FM mode. The display will show the
frequency.
1.
Tap the
POWER/STANDBY
Button turn on the unit.
2.
Tap the
SOURCE
Button select FM mode, the FM radio frequency appear in display.
3.
To manually tune to a specific radio station, tap the TUNE
or
Button on either main unit. Use
the manual tuning method to tune in weaker stations that are bypassed during Automatic Tuning.
4.
To automatically tune to the next available radio station, press and hold the
or
Button for 1-2
seconds until frequency readout on the display begins to scan and then release the button. The tuner will
stop scanning when it receives the next broadcasting station of adequate signal strength.
HINTS FOR BEST RECEPTION:
FM -
For best FM reception, the FM lead wire antenna located on the back of the unit should be fully
unwrapped and extended.
NOTE:
Automatic tuning depends on the signal strength of the broadcasting station, so weak stations may be
skipped. You can manually tune to find the weak stations if a station gets skipped. With strong signals,
the tuner may stop before it reaches the actual broadcast frequency, so you may need to manually
tune for the best reception.
PRESET STATIONS
You can store up to 20 FM radio stations for quick access.
To quick-store a station to a preset button (1-2)
Tune to the FM radio station you want to store. Press and hold one of the numbered Preset buttons (1-2) for
two seconds until you see a message to confirm that the preset has been stored.
To store a station to the preset list (3-20)
1. Tune to the FM radio station you want to store.
