Wireless TV Speaker
H796
Instructions for Use
Please read and retain these instructions for future reference
v002: 11/04/22
The Enterprise
Department
UK Head Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400*, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
*UK Calls cost around 7 pence per minute plus your
telephone company’s network access.
Please check with your telephone supplier.
1.
Press the Preset button (8) once recall the preset station directly. Press the Preset button (8) continuously
to select the desired stored preset station.
2.
For preset station nr. 1 button (12) / nr. 2 (13) / nr. 3 (14) / nr. 4 (15) on the main unit directly to recall
these four preset stations.
3.
Display will show the preset station frequency and preset store number (1, 2, 3… etc).
➢
The preset stations will be reset completely if the speaker is disconnected from the the mains power
supply. It is recommended to switch the system into standby mode for convenient use.
Bluetooth connecting and playback
1.
Turn on the unit by pressing On/Off button (3), then press the Mode button (2) to select BT (Bluetooth)
mode.
2.
“BT” will be shown on the LCD display and the Bluetooth icon will flash. It means the Bluetooth is in
searching mode.
3.
Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select
“
BergstromTV Spk
” Bluetooth equipment to connect.
4.
Once connected successfully, the Bluetooth icon will become static.
5.
Start playback from your Bluetooth device and enjoy the music.
6.
Adjust the Volume Up/Down button (5) to desired volume level.
7.
You can press the Play button (7) of the unit to pause or resume the music playback.
8.
To disconnect the Bluetooth connection, press and hold the Play button (7) disconnect the Bluetooth
feature of your Bluetooth device. The Bluetooth icon will flash again for pairing of a new device or switch
off the unit. Repeat step 3-5 above to connect for another Bluetooth device.
Bluetooth Transmission
⚫
To Connect with TV and act as a TV speaker
The charger docking station is equipped with Bluetooth transmitter which can connect with the main unit
wirelessly.
By connecting the TV with the charger docking station via a RCA-to-3.5mm cable and the Bluetooth wireless
connection between the charger docking station and the main unit, this main unit can deliver the sound
signal of your TV system in order to act as a TV speaker.
1.
Connect the power to the charger docking station following the instruction step 1-
2 of “Connection”.
2.
To connect the TV with the charger docking station via a RCA-to-3.5mm cable: Plug the RCA jacks to the
TV and the 3.5mm jack to the Aux-in jack (24) of the charger docking station.
3.
Press the Pairing button (23) on the charger docking station.
4.
Turn on the unit by pressing On/Off button (3), then press the Mode button (2) to select BT (Bluetooth)
mode.
5.
Wait for the connection between the main unit to the charger docking station.
6.
Once they are connected, the Bluetooth icon on the LCD display (11) will be static.
