USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
13
3
Intended Use
The B-EasyConnect module is designed for use in an automation system with the following opera-
tion conditions:
Rated supply voltage around 5V (DC voltage) via micro USB socket according to USB stand-
ard (4.25V
… 5.25V). The device must not be connected to an AC power supply.
Please use the micro USB socket intended for power supply and data communication.
Environment with maximum pollution degree 2 (according to EN 61010-1)
Altitude up to 2000 m above sea level.
Only in rooms closed on all sides (indoors) without direct UV radiation exposure.
Max. Ambient temperature inside and outside a closed enclosure according to technical data
(see section 10 "Technical data")
Use in the industrial sector, as well as in the business/commercial sector or in small busi-
nesses - but not in private households
The 2.4 GHz frequency band according to IEEE 802.11 must be used exclusively for wireless
communication. Only the radio channels approved for use in the respective country may be
used.
The device must be operated only with the SD card included in the scope of delivery; modifi-
cations are not permitted.
Correct transport, positioning, installation and use as well as careful maintenance are essential for
the safe and reliable operation of the B-EasyConnect. The equipment must only be used under the
conditions and in the applications specified in this documentation and the associated user manuals.
Only use the B-EasyConnect as follows:
As intended
In technically proper condition
Without unauthorized modifications
By qualified personnel (as described in section 1.4)
Any other use or modification is not an intended use.
Comply with the regulations of the employers' liability insurance association, the technical super-
visory association, the VDE regulations or corresponding national regulations..
