PowerSync II
Operator’s Manual & Installation Instructions
Page 1
Rev: 1.1
1.405.364.4212 /
www.bergey.com
Permanently-connected, utility Interactive, single-phase, inverters
Model PSII12 WIND TURBINE INVERTER (240 VAC nominal output)
The phase angle between L1 and L2 is 180°. Line to Neutral is 120 VAC nominal.
Model PSII126208 WIND TURBINE INVERTER (208 VAC nominal output)
The phase angle between L1 and L2 is 120°. Line to Neutral is 120 VAC nominal.
ETL - Evaluated to the requirements of the Standard for Safety for Inverters, Converters, Controllers and
Interconnection System Equipment for Use with Distributed Energy Resources, UL 1741, 2nd Edition,
dated January 28, 2010.
CNL - Additionally evaluated to CAN/CSA C22.2 No. 107.1-1, "General Use Power Supplies." 3rd
Edition, Dated September 1
st
, 2001 with revision through 2006.
The
Bergey WindPower Company’s model PSII12 and PSII126208 inverters are intended for variable
frequency un-rectified 3-phase AC input from Wind Powered Turbines.
1. Table of Contents
1.
TABLE OF CONTENTS ...................................................................................................................................... 1
2.
RATINGS ......................................................................................................................................................... 2
2.1.
I
NPUT
R
ATING
.................................................................................................................................................... 2
2.2.
O
UTPUT
R
ATING
................................................................................................................................................. 2
2.3.
O
THER
S
PECIFICATIONS
........................................................................................................................................ 2
3.
IMPORTANT SAFETY INSTRUCTIONS .............................................................................................................. 3
4.
INSTALLATION ................................................................................................................................................ 4
4.1.
D
IMENSIONS
...................................................................................................................................................... 4
4.2.
L
OCATING
......................................................................................................................................................... 5
4.3.
M
OUNTING
....................................................................................................................................................... 5
4.4.
E
LECTRICAL
C
ONNECTIONS
................................................................................................................................... 5
4.5.
AC
L
INE
(O
UTPUT
)
C
ONNECTION
........................................................................................................................... 6
4.6.
T
URBINE
(I
NPUT
)
C
ONNECTION
............................................................................................................................. 6
4.7.
E
ARTH
G
ROUND
C
ONNECTION
.............................................................................................................................. 6
4.8.
F
USE REPLACEMENT
............................................................................................................................................ 6
4.9.
C
ONNECTION EXAMPLE
........................................................................................................................................ 7
5.
OPERATION .................................................................................................................................................... 8
6.
TOUCH SCREEN DISPLAY ................................................................................................................................ 8
7.
TROUBLE SHOOTING .................................................................................................................................... 10
8.
EQUIPMENT MAINTENANCE ........................................................................................................................ 11
9.
RETURN SHIPMENT INFORMATION .............................................................................................................. 12
10.
REVISION HISTORY ................................................................................................................................... 12
