background image

Height Right Chair

ASSEMBLY GUIDE

 

     

WARNING

:

 

Prevent serious injury or 

 death from falls or sliding out.

• Never leave child unattended 

• Always keep child in view

• Secure straps tightly

• Never use as a stepping stool

• Always secure child in the restraint

 

 

!

!

Parts

Left Side

Right Side

Foot Rest

(8 pcs.) (4 pcs.)(4 pcs.)

3

4

5

(8 pcs.)

a

b

c

d

e

(6 pcs.)

Right + Left Cap Right + Left Clip

* optional with tray

and grab rail.

Seat

a

e

d

d

d

d

c

c

d

2 Back Supports

Front Support

2 Metal Cross Bars

Allen Key

Back

Insert a Wooden Dowel (e) into the larger hole in each of the Back Supports
and Front Support. Insert a Wood Nut (a), as shown into the inner holes of 
the 3 Supports. Attach the 3 Wooden Supports as shown and insert Long
Screws (d). Loosely tighten the Long Screws into Wood Nuts through the Left
Side with the Allen Key. Labeling on the Rear Supports should be visible.

Attach the 2 Metal Cross Bars as shown and 
insert Screws (c) . Loosely tighten the
Screws (c) into the Metal Cross Bars through
Left Side with the Allen Key.

Slide in the Seat and Foot Plate with the curved
edges facing forward. Make sure that the Seat 
and Foot Rest are at the appropriate height for
the occupant. See the Sizing section for proper
placement of the Seat and Foot Rest.

Insert the rest of the Dowels, Wood Nuts, and
Screws as needed to attach the Right Side of 
the chair. Do Not fully tighten screws.

Insert a Wood Nut (a), as shown into the inner holes of the Back. Attach the 
Back as shown and insert a Long Screw (d). Loosely tighten the Long Screw 
into Wood Nut through the Left Side with the Allen Key.

• Use for children 6 months and up

  or when child can sit independently

• The front edge of the footrest should 

   never extend beyond the bottom 

   edge of the front supports at floor level

• SHORTER THAN

BACK SUPPORTS

FRONT

SUPPORT IS

SHORTER

HARDWARE 

a (3pcs.)

 

 

d (3pcs.)

 

 

e (3pcs.)

HARDWARE 

(4pcs.)

 

 

(4pcs.)

 

 

(3pcs.)

 

 

(2pcs.)

HARDWARE 

(2pcs.)

HARDWARE 

(1pcs.)

 

 

(1pcs.)

a

d

c

c

* As the child grows,

the TOP metal cross

bar CAN be removed.

Logos this side

1

2

     

WARNING

The child should be secured in the high chair at all times by the restraining 

system. The tray is not designed to hold the child in the chair. It is recommended that the chair be 

used only by children capable of sitting upright unassisted.

Отзывы: