Bergantino B AMP, Руководство пользователя

Страница: 20 / 24

20
Screen 11 – Factory Reset Menu
This menu allows you to return to original factory settings.
•
Turn BASS/Filters knob until a 1 appears in first position.
•
Turn LMID/Mem1 knob until a 2 appears in the second position.
•
Turn HMID/Mem2 knob until a 3 appears in the third position.
•
Turn TRBL/Bright know until a 4 appears in the fourth position.
•
Press any knob to return to original factory settings.
ð
This reset will NOT erase any stored Speaker Profiles in the B
|
AMP ’s memory, nor will
it erase any stored user memory settings.
Screen 12 – Software Rev. Menu
This menu displays the current version of the software loaded into your B
|
AMP .
It will also be displayed upon power up on the welcome screen menus.
Firmware Upgrade
If new software becomes available for your
B
|
AMP , you can upgrade the firmware via the USB
port by doing the following:
•
Load the firmware *.hex file onto a FAT32 formatted thumb drive.
•
Rename the file to Bampfw.hex
•
With the B
|
AMP ’s power off, insert the thumb drive into the USB port
•
While holding the PGM button in, turn the B
|
AMP on and continue to hold the PGM
button in until the PGM led starts flashing.
•
Once the Home screen appears on the LCD display, remove thumb drive and recycle
power.
•
Your new software is ready to go!