BERG BENOMIC Series, Техническое руководство

Страница: 21 / 43

Translated user manual (EN-V11) BENOMIC

21 / 43
8.1 Operation
8.1.1 Controls located on the lower trolley
1. MAIN SWITCH/ EMERGENCY STOP
The BENOMIC can be switched on by way of the main switch. The trolley is ON if the red key is
in the direction of travel (vertical), and the trolley is OFF if the red key is at right angles to the
direction of travel. Whenever the
BENOMIC is switched on the battery condition indicator lights
up (see this at no 4). Whenever the BENOMIC is not in use or being charged the red key should
be removed from the switch. The main switch also acts as an emergency stop. As soon as the
key is set to the horizontal position the trolley is completely switched off.
2. SERVICE BUTTON FOR OPERATING THE SCISSOR
By using the scissor operation selector switch it is possible to raise and lower the platform
without having to stand on it. Rotate the button clockwise (white line upwards) and the scissor
rises up for as long as the button is kept in that position. Rotate the button anticlockwise (white
line downwards) and the scissor lowers for as long as the button is kept in that position.
Attention!
- Ensure that no person or object can come either under or between the scissor
construction while it is being lowered!
-
Ensure that there is sufficient space above the BENOMIC to allow the scissor to
rise up!
-
Do not use this button if there is anybody on the platform!
3. SOCKET FOR THE CHARGER PLUG
The batteries are charged via this socket. With normal use, charge the batteries three times
every week - preferably Tuesday, Thursday and Friday or Saturday evenings - and at least once
every week regardless of the level of usage. Make sure that the charger plug has been
disconnected before the
BENOMIC is going to be used! Always remove the charger plug when
carrying out maintenance. Only use the correct type of charger - see the charger
specifications.
If the
BENOMIC is fitted with an internal battery charger (stated on the socket - see
fig. 6.2) then only an extension cable is required.
Fig. 6.1 - Controls on
the lower trolley of the
BENOMIC
Fig. 6.2 - Internal battery charger!
1 2
3
4