background image

 

5

Check that the product is complete, undamaged 

and as ordered as soon as you receive it. Report 

any discrepancies or damage to the 

BERETTA

 

dealer who sold it.

This product must be installed by a legally qualified 

heating engineer. On completion of the installation, 

the installer must issue the owner with a declara-

tion of conformity confirming that the installation has 

been completed to the highest standards in com-

pliance with the instructions provided by 

BERETTA

 

in this instruction manual, and that it conforms to all 

applicable laws and standards.

This product must only be used for the purpose 

for which it is designed and made, as specified by 

BERETTA

BERETTA

 declines all responsibility, 

contractual or other, for damage to property or inju-

ry to persons or animals caused by improper instal-

lation, adjustment, maintenance or use.

The product must be serviced at least once a year. 

Servicing must be arranged in advance with the 

BERETTA

 Technical Assistance Centre.

All servicing and repairs must be performed by a 

qualified heating engineer.

If water leaks from the storage cylinder, turn off the 

water supply and contact 

BERETTA

’s Technical 

Assistance Centre or a qualified heating engineer 

immediately.

If the product is not going to be used for an exten-

ded period of time, contact the manufacturer’s 

Technical Assistance Centre to have at least the fol-

lowing operations performed:

 

-

Close the shut-off cocks for the domestic hot 

water circuit

 

-

Shut down the boiler connected to the storage 

cylinder as instructed in its own manual

 

-

Switch the storage cylinder OFF at the control 

panel (if fitted) and at the mains power switch

 

-

Drain the central heating circuit and domestic hot 

water circuit if there is any risk of freezing.

This instruction manual is an integral part of the 

product. It must be kept safe and must ALWAYS 

accompany the product, even if it is sold to another 

owner or transferred to another user or to another 

installation. If you lose this manual, order a repla-

cement immediately. Keep the product purchase 

documents to be presented to the 

BERETTA

 autho-

rised Technical Assistance Centre to request a ser-

vice call under warranty.

Size the solar expansion tank so as to ensure com-

plete absorption of the expansion of the fluid con-

tained within the system, with reference to the pre-

vailing regulations on the matter. In particular, con-

sider fluid characteristics, considerable fluctuation 

of service temperature and vapour that might be 

generated during solar collector stagnation stage. 

Proper size of expansion tank ensures setting off of 

all volume changes of the heat transfer fluid, avoi-

ding excessive pressure increase. Limited pressure 

changes avoid reaching safety valve opening pres-

sure and the consequent fluid drainage.

Do not allow children or infirm persons to operate 

the storage tank unsupervised.

Do not touch the storage tank when barefoot or wet.

Never clean or service the storage tank without first 

disconnecting it from the mains electricity supply by 

turning the main power switch and the control panel 

switch OFF.

Do not interfere with any control devices without 

specific authorisation and instructions from the 

manufacturer.

Never pull, disconnect, or twist the electrical cables 

coming from the appliance even if it is discon-

nected from the mains electricity supply.

Do not expose the storage tank to the elements.

It is not designed for use outdoors.

Do not leave packaging material within the reach of 

children, since it can become a potential hazard.

If the pressure in the solar heating circuit drops, do 

not top up with water alone, since this increases the 

risk of damage from freezing.

Do not use connections or safety devices or fittings 

(expansion vessels, pipes, insulation) that are not 

specifically designed and tested for use in solar 

heating installations.

The operation of any appliance that uses electrical power and water demands that a number of fundamental safety 
precautions be respected. In paricular:

Safety precautions

General safety information

Содержание STOR 2000

















Отзывы: