The Beresford TC-7250
Stereo Amplifier and Subwoofer/Speaker Selector
REV1.0 instructions
This state of the art speaker selector allows you to select between two amplifiers and two sets of
speakers. The combined screw, banana plug, or bare wire terminals on the switch box allow secure
and easy access for cables.
Product Features
Listen to amplifier A or B through speakers 1
Listen to amplifier A or B through speakers 1 and 2
Listen to amplifier A or B through speakers 1 and a subwoofer
Connections
Caution:
Be sure to follow proper polarity (– to – and + to +) when making connections.
1.
Connect amplifier A Left speaker output terminals to the TC-7250 AMPLIFIER A L (left) negative
(–) and positive (+) terminals.
2.
Connect the amplifier's Right speaker output terminals to corresponding AMP R (right) negative
(–) and positive (+) terminals on the TC-7250.
3.
Connect Speaker-1 left and right negative (–) and positive (+) terminals to the corresponding
Speaker-1 Right and Left terminals on the TC-7250.
4.
Connect Speaker-2 left and right negative (–) and positive (+) terminals to the corresponding
Speaker-2 left and right terminals on the TC-7250.
Speaker-2 can be used either for another pair of matching speakers to the ones connected to the