Bercomac Berco 700316-4, Руководство пользователя

Страница: 8 / 20

6
ASSEMBLY
STEP 1
ROTARY BROOM PREPARATION
IMPORTANT: TORQUE ALL BOLTS ACCORDING TO TORQUE SPECIFICATION TABLE (SEE TABLE OF
CONTENTS) WHEN STATED: TIGHTEN FIRMLY. REFER TO PARTS BREAKDOWN SECTION FOR PARTS
IDENTIFICATION.
Prepare broom
Install the parking stands
TOOLS REQUIRED:
1 pair of long nose pliers
Install the control rod (item 3).
# Item Description Action
1 Joint bloc Install on the latch
rod.
2 Retaining ring Secure the joint
block.
3 Control rod Insert in the joint
block
4 Hair pin 2.5mm Secure the control
rod.
CONVERSION TABLE
1’’ (po, in) 25.4 mm
1’ (pi, ft) 0.3 m
1 psi (lb/in
2
) 6.89 kPa
1 lb 0.45 kg
1 lbf 4.4 N
1 m/h (mi/h) 1.61 km/h
1 hp (cv) 0.75 kW
Install the parking stands (item 1).
# Item Description Action
1 Parking stand Install in the stand
support.
2 Cotter pin 5/32’’ x 1’’ Install in the top
hole.
3 Hair pin Install in the bottom
hole.
This will allow the broom to rest on the parking
stands.