Bercomac 700413-5, Руководство пользователя, Страница: 23 / 40

21
ASSEMBLY
For tractors with Electric Clutch:
Install the belt on the engine pulley of the vehicle.
Check the tension on the spring.
If necessary, adjust the tension by moving the
adjustment rod (item 1) and tighten the set screw
(item 2).
No modifications to be done
Install the drive mechanism
Install the drive mechanism (item 1).
# Item Description Action
1 The front end of drive
mechanism
Hook on the pins.
2 The back end of
drive mechanism
Install between the
supports.
3 Pin Insert as shown.
*See note.
4 Hair pin Secure the pin.
*NOTE: If the pin (item 3) is difficult to slide in the
supports, loosen the nuts ( item A).
Install the tractor’s manual clutch cable .
* Remove the spring.
# Item Description Action
1 Spring from the
clutch cable
Install as shown in the hole
on the tension pulley.
2 Clutch cable Insert in the slot on the
adjustment rod.
3 Hair pin 2mm Secure the cable.
4 Adjustment rod Slide towards the back to
apply enough tension on the
spring.*
5 Square head set
screw 5/16 x 1/2’’
Secure the adjustment rod.
Install the belt on the engine pulley of the vehicle.
Check the tension on the spring.
If necessary, adjust the tension by moving the
adjustment rod and tighten the set screw.
Install the manual clutch cable
For tractors with Manual Clutch activated by a cable: