Bercomac 700360-9, Руководство пользователя, Страница: 15 / 36

13
ADJUSTING THE PRESSURE OF THE
SUBFRAME TIRES ON THE GROUND
When the ground is soft, the vehicle may lose some
of its manoeuvrability because the tires on the
subframe have a tendency to dig into the ground.
In order to avoid this problem, it is possible to install
the pulley assembly 106140 (item 1) supplied with the
snowblower.
Thread the winch cable through the pulley assembly.
Join the pulley to the eye on the subframe (item 2)
with the chain (item 3) two shackles (item 4).
OPERATION
NOTE: The closer the pulley assembly is to the
subframe, less the wheels will dig into the ground;
therefore it will be easier to manoeuvre.
NOTE: Make sure you do not compress the vehicle’s
suspension too much when transferring the weight of
the snowblower.
CAUTION: Make sure the subframe does not come
into contact with the vehicle.
SKID SHOE ADJUSTMENT
Level paved surface: Adjust skid shoes to allow 3/16”
to 1/4" or 5 mm to 7 mm clearance
(A) between
cutting edge and surface.
Uneven or gravel surface: Adjust skid shoes to allow
1/2” to 5/8" or 13 mm to 16 mm clearance
(A)
between cutting edge and surface.
Skid shoe adjustment
Danger zone
DANGER
DANGER ZONE
It is the snowblower operator’s obligation to make
sure there are no people or objects that can be
thrown in this zone when the snowblower is running.
SNOWBLOWING TECHNIQUE
When removing snow, do not use the snowblower as
a dozer blade to push snow. Allow snowblower to
ingest snow at its own speed. If the speed of your
A.T.V. is too fast, the snowblower may become
overloaded and plug.
Adjusting the pulley assembly