Bercomac 700233-1, Руководство пользователя, Страница: 8 / 24

6
ASSEMBLY
Adjust the overall length of the push tube (item 1) to
37 3/4" by screwing or unscrewing the adjusting rod
(item 2). Place the end of the adjusting rod into the
large hole of the pivot support (item 3) and secure in
place with a 3mm hair pin (not shown in the ) in the
hole (item 4).
Attach the spring (item 1) to the idler arm.
Secure in place with a 3mm hair pin (not shown).
Install the handgrip (item 3) on the idler arm.
Install the handle support (item1) on the support (item
2) welded on the side of tractor frame with two 5/16 x
3/4" hex bolts (item 3) and flange nuts (item 4).
Tighten firmly.
Insert the plastic grommet (item 5) as shown.
Install spring & hand grip
Install handle support
Install push tube