Berbel Skyline Edge Sound, Руководство по эксплуатации

Страница: 31 / 104

31
First steps
The following brief instructions describe the basic procedure you must carry out before you use
the sound system for the first time to play music.

Main switch
Before you can use the sound system you must move the main switch to
the “I” position.

When the main switch is operated to turn the sound system on, you will
need to wait about 60 seconds before it is possible to switch the system on
using the

button. During this period the Status indicator flashes red.
Please wait until the indicator flashes red-white (default state: stand-by
mode, no WLAN connection).
If the indicator lights up solid red instead of flashing red-white, the sound
system is already connected to a WLAN.

Switching on


A brief press on the

button switches the sound system on. Once
running, the system takes a little while - around 40 seconds - to start fully
and be ready for use. During this start-up phase the Status indicator
flashes red. Once the sound system is operating, the Status indicator
switches to the colour corresponding to the currently selected source
(see table on page 34).

Setting up the
WLAN



A WLAN network connection is required in order to operate and
control the sound system.
You will find details on this in the chapter entitled “
Configuring the WLAN
connection
”.

Creating a WLAN connection using WPS

The first step is to activate the WPS function of your router or WLAN
Access Point. You will find details on this in the description of the
device.

Within two minutes of initial activation, press the button (see page
30) on the extractor hood; hold the button pressed in until the Status
indicator flashes white. As soon as the WLAN connection is
established, the Status indicator reverts to a constant display in the
colour of the currently selected source. In most cases the connection is
complete within a few seconds.

Connect your smartphone or your tablet computer to the same WLAN
to which the sound system is also connected.

Install the App matching your operating system.
(QR codes for this can be found in the chapter enti
tled “App
operation”)

Start the app.

The app automatically searches for the sound system.