Berbel KNX-RF, Сведения о сборке

Страница: 21 / 36

21
Contact
6003620_0 – 02.05.2017
EN
If the programming button has been pressed:
☞
Complete commissioning as described in the associated
product manual.
The product manual of the device must be observed.
The following ceiling lift hood functions can be programmed:
y
Control fan stages (1/2/3/P)
y
Effect lighting (on/off )
y
Hob lighting (on/off )
y
Drive (raise/lower)
y
EcoSwitch (recirculated air/exhaust air)
☞
Place the cover onto the ceiling lift hood again.
☞
Ensure that the support cable and the mains cable are in
the guide slots and are free to move.
☞
Screw the cover tight again.
The device is ready for operation.
3. Contact
berbel Ablufttechnik GmbH
If you have any questions or suggestions, please select from
the following options:
Post: berbel Ablufttechnik GmbH
Sandkampstraße 100
D-48432 Rheine
Telephone: +49 (0) 5971 / 80 80 9 - 0
Mon to Thu 8:00 – 17:30 hrs
and Fri 8:00 – 16:30 hrs
Fax: +49 (0) 5971 / 80 80 9 - 10
Internet: www.berbel.de
Email: info@berbel.de
Contact the manufacturer‘s customer support
department
There are several ways for you to contact our customer
service. Please select from the following options:
Telephone: +49 (0) 5971 / 80 80 9 - 660
Mon to Thu 8:00 – 17:30 hrs
and Fri 8:00 – 16:30 hrs
Fax: +49 (0) 5971 / 80 80 9 - 10
Email: service@berbel.de