39
Installation
6005501_b – 01.07.2021
EN
3.2.3
Installing the device
For hob installation, refer to the hob extractor instructions.
☞
Place the hob upside down on a protective surface, so
that the underside faces upwards.
☞
Fit the assembly profiles on the long sides. When doing
so, pay attention to the drill hole alignment.
☞
Fit the mitre angles in the assembly profiles for the short
sides.
☞
Insert the screws.
☞
Loosely tighten the screws.
☞
Slide the assembly profiles for the short sides into the
assembly profiles on the hob. When doing so, make sure
the distance between the assembly profiles remains a
short as possible.
☞
Insert the remaining screws.
☞
Tighten all screws (torque max. 0.7 Nm).
The sealing strip is included in the scope of delivery of the
hob.
☞
Apply the sealing strip on all sides of the hob frame.
For further information on assembly, disassembly
and disposal of the hob, refer to the corresponding
instructions.
Содержание BKA 83 DLC-E
Страница 42: ...42 6005501_b 01 07 2021 ...
Страница 43: ...43 6005501_b 01 07 2021 ...
Страница 44: ...6005501_b 01 07 2021 ...