![Berbel BDL 115 SK Скачать руководство пользователя страница 81](http://html1.mh-extra.com/html/berbel/bdl-115-sk/bdl-115-sk_operating-and-installation-instructions_2736429081.webp)
81
Operation
EN
6002782_b – 14.09.2016
D
E
F
A
C
B
A Infrared sensor (IR transmitter)
B Battery indication
C OFF button
D LED
E Touch fields
F Connector for charging cable
After switching on the mains power supply, the device needs
a few seconds in order to adapt itself to the environmental
conditions. During this time, it cannot be operated.
The remote control has a range of up to 10 m.
Devices with a Bluetooth receiver (optional accessory) can
also be operated with the “Hood Remote” app (only for iOS,
Apple App Store) via a smartphone or tablet.
The following code is required for the app: 1234.
Touching a touch field executes the corresponding function.
The function is confirmed:
y
A beep sounds.
y
The remote control vibrates.
y
The LED illuminates for a short time.
Touch
field
Function
OFF
Power level 1
Power level 2
Power level 3
Power level POWER (max. 6 minutes)
Hob lighting
Effect lighting
1
Run-on function
Colour change for effect lighting (only
available on devices with RGB lighting)
2
Recirculated air mode
Extracted air mode (only available if an
exhaust air duct is installed)
“Raise” function
“Lower” function
1
Operation of the effect lighting on the device.
2
With devices with RGB lighting (special equipment), the
dimmer function is omitted.
For ceiling consoles with glass cover and integrated ceiling
effect lighting:
Operation of the ceiling effect lighting takes place exclusively
via the customer’s illuminated switch. Control via the remote
control is not possible.
The “Power level 3” and “Hob lighting” functions can also be
operated using additional buttons on the top of the device.
If the remote control is used normally, the battery lasts for a
maximum of 100 days. If the battery indication illuminates
red, the battery must be charged.
D
Содержание BDL 115 SK
Страница 92: ...6002782_b 14 09 2016 ...