Beper VE.300B, Инструкции по применению, Страница: 8 / 24

8
Tower Fan Use instructions
FAN OPERATION
Plug into any AC 220230V, 50Hz source, insure that the plug and the socket fit well.
You can operate the appliance by the control panel or remote controller
Control panel Remote
ON/OFF button:
Press the button once, the fan will start at LOW speed mode and normal wind
mode.
Press again to turn the fan off.
SPEED button:
Fan speed adjust:
Press once to to set MED fan speed.
Press the third time to set HIGH fan speed.
Press the fourth time return to LOW fan speed.
Select normal wind mode, or natural wind mode.
Press the button once to select NATURAL mode and the “NAT” LED indicator will
be on, press again to switch to NORMAL mode.
NORMAL(Default): unit operates in selected fan speed, High, Medium or Low
NATURAL mode: unit operates according to computerized intervals of changing
speeds;
TIMER button:
When the fan is in use, you can set the time to close the appliance. Press this
button to select 1, 2 or 4 hours.
When select different time, the TIME led will display different color:
RED=1 hour;
ORANGE=2 hours;
GREEN=4 hours;
OSC button
To activate the Oscillation feature, press the OSC button once.
Press again to cancel
In the oscillating mode the fan is automatically turning approximately about 30
degrees to the left and to the right