ZEN Water Fountain Use Instructions
EN
7
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Some warnings
This appliance cannot be used by children, or persons with reduced
physical, sensitive or intellectual capabilities, or with lack of expe-
rience and knowledge, without supervision or if they are not given
instructions and warnings on the correct and safe use of the device
and the potential risks related to its use.
Do not let children play with this appliance. Any cleaning and/or main-
tenance operation cannot be carried out by children without proper
surveillance.
Do not immerse the item (except for the pump) and its power cable in
water or other liquids.
This appliance is only intended for domestic use. Do not use outdo-
ors.
Description of product Fig.A
1. Decorative ball
2. Top cover
3. Base
4. Pump
5. Flow regulation switch
Assembling
Place the base on a flat and stable surface. Fill with water up to the rim, and place the top cover with the pump
already installed on to the base, making sure that the pump is fully immersed and the small suction cups are
attached to the bottom.
Important: it is better to use distilled water; in the long run, lime stone and mineral residues contai-
ned in tap water may, settle inside the pump, preventing its correct operation.
Place the decorative ball on top of the hole where water comes out, and the power cable inside the slot found on
the back, making sure non to get the plug wet.
