ENGLISH
Electric Ice Crusher Use instructions
9
USE
1. Insert the plug into an electric socket. Position the ice container and remove the tran-
sparent lid.
2. The on/off switch is located on the side of the casing.
3. Turn on the appliance by pressing down the ON/OFF switch to position“1”.
4. Place an ice cube(max. size approx. 25 x 25 x 25 mm) on the scoop and press the silver
lid with the scoop to open the silver lid so that the ice cube can slide into ice container .
Note:
Don’t push the silver lid with your fingers. Do not put any ice cubes on that are bigger than
the opening of the reservoir.
Never put your fingers or other objects into the ice chute introduction. There is a danger
of injury from the ice crusher blade rotating.
First turn on the ice crusher and then insert the ice cubes, do the opposite; cubes might
clog and damage the engine
5. Keep the machine switched on until all the ice cubes have been crushed.
6. Turn off the appliance by pressing down the ON/OFF switch to position ”0”.
7. You can now remove the ice container to serve the ice. Replace the empty ice container in the
machine.
ATTENTION
If an ice cube jams the action of the machine, never stick your finger into the appliance to remove
the ice cube. First remove the plug from the socket and remove the ice container, then hold the lid
of the reservoir open, turn the ice crusher upside down, and shake it until the ice cube drops out of
the machine.
CLEANING
1. Never immerse the appliance in water or any other liquid.
2. Always remove the plug from the socket before you clean the Ice Crusher.
3. Clean the casing with a damp cloth or sponge. Never use abrasive cleaning materials or pan
scrubbers.
Clean the ice container in warm water, to which a little detergent may be added. Never wash it in hot
water. The ice container should not be washed in a dishwasher.
4. Attention: the motor is permanently lubricated; never oil it yourself.
TECHNICAL DATA
Power: 55W
Power supply: 220-240v – 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.