Beper 40.809, Инструкции по применению

Страница: 8 / 24

Personal scale Use instructions
8
IMPORTANT RECOMMENDATIONS FOR USE
ALWAYS WEIGH YOURSELF UNDER THE SAME CONDITIONS, PREFERABLY FIRST
THING IN THE MORNING (to avoid taking into account the weight variations during the
day, relating to diet, digestion and physical activity). Significant weight differences may be
observed from one day to the next.
Why does it take a few seconds for your scales to display the weight?
The time to display the weight depends on how long it takes you to stand stationary. You must be
perfectly still for the scales to calculate your weight and display it. As a rule, the heavier the
weight the longer the time until complete stabilisation occurs.
Why is your weight different on mechanical scales?
Even when brand new, mechanical scales are up to 10 times less accurate than BEPER fully elec­
tronic scales. In
time, the moving parts (beams, knife edges) wear or require adjustment leading to less
accurate results such as a weight less than the true weight.
ADVISE FOR USE & CARE
1. The platform will be slippery when it is wet. Keep it dry!
2. Keep standing still during the course of weighing.
3. DO NOT strike, shock or drop the scale.
4. Treat the scale with care as it is a precise instrument.
5. Clean the scale with a damp cloth and avoid water getting inside the scale.
DO NOT use chemical/abrasive cleaning agents.
6. Keep the scale in cool place with dry air.
7. Always keep your scale in horizontal position.
8. If failed to turn on the scale, check whether battery is installed, or battery power is
low. Insert or replace new battery.
9. If there is error on display or can not turn off the scale for a long time, please take
off the battery for about 3 seconds, then install it again to re move soft­fault. If you
can not resolve the problem, please contact your dealer for consultation.
10. Do not use it for commercial purpose.
PRODUCT DESCRIPTION Fig.1
1. Read­out display
2. Infrared receiver
3. Infrared projector
4. Main unit
5. Engaged wiewd read­out display
TO WEIGH Fig.2
To make sure accuracy, place the scale on a hard, flat floor and avoid carpet or soft sur­
face.