Panel Mount Instructions
1.
Choose mounting location
2.
Ensure positive leads are removed from battery banks
3.
Use the mounting template (shown below) to mark hole positions
4.
Drill four machine screw holes and the 92mm (or 3 5/8”) hole for the switch body.
5.
Front panel mounting only: either recess for the four clipping features (see template) or cut/file off these features from the
battery switch plate
6.
Mount switch to panel using M6 (or ¼”) machine screws – note: use either pan or cheesehead screws only
7.
Connect cables to studs ensuring that batteries and loads are correctly fitted
8.
Check that spring washers are fitted beneath nuts
9.
Tighten the stud nuts to 13.5 Nm (10 lbf)
10.
Rear panel mounting only: back plate and side panels can also be clipped to the switch for cable protection/insulation
11.
Ensure cables are secured to ISO/ABYC standards, and that cables are supported so they are not placing strain on the
battery switch studs (see diagram)
12.
With switch in “OFF” position connect battery positive leads at battery
13.
Check switch operation (as below)
Check switch operation:
a. Loads have no voltage in “OFF” position
b. Loads have voltage in “ON” position
Example System:
NOTE -This diagram is a guide only showing
On/Off Switch connections and is not intended as
a full electrical systems wiring diagram.
Mounting Template
Surface Mount Screw Holes
For Backplate
55.0 [2.17]
55.0 [2.17]
76.2 [3.00]
76.2 [3.00]
5.0 [0.20]
6.4 [0.25]
92.0 [3.62]
Use 3
5
8
"
holesaw
47.7 [1.88]
13.9 [0.55]
30.4 [1.20]
97.8 [3.85]
91.9 [3.62]
38.0 [1.50]
53.9 [2.12]
Clipping feature:
• Either remove clipping
features or recess panel
when front panel mounting
Dimensions:
Loads
Engine
+
-
Optional Fuse
Mounting Template
Surface Mount Screw Holes
For Backplate
55.0 [2.17]
55.0 [2.17]
76.2 [3.00]
76.2 [3.00]
5.0 [0.20]
6.4 [0.25]
92.0 [3.62]
Use 3
5
8
"
holesaw
47.7 [1.88]
13.9 [0.55]
30.4 [1.20]
97.8 [3.85]
91.9 [3.62]
38.0 [1.50]
53.9 [2.12]
Clipping feature:
• Either remove clipping
features or recess panel
when front panel mounting
SURFACE
MOUNT
REAR
PANEL
MOUNT
FRONT
PANEL
MOUNT
SURFACE
MOUNT
REAR
PANEL
MOUNT
FRONT
PANEL
MOUNT
Please check scale
before using
