TV
LIGHT
RADIO
DTV
DVD
CD
V.MEM
TEXT
A.MEM
7
8
9
4
5
6
LIST
0
MENU
1
2
3
STOP
PLAY
BACK
How to use your remote control
Important
– guides and FAQs are found on
www.bang-olufsen.com/guides
Select colour specific functions
Adjust volume
To mute, press the middle of the button
The Beo4 display shows you the activated source or function
Navigation button left, right, up and down , ,
and . Move in menus by pressing
the button in the direction you need
Centre button is used for selecting and accepting
Search backwards or forwards step by step
Hold to rewind or wind
Start playback from built-in or connected equipment
Switch on WebMedia (requires Internet connection). See the online guide for more
information
Standby
Bring up the main menu of the active source
Pause and stop playback or recording
Switch on the TV*
1
Select channels and enter information in on-screen menus
Step through channels
Move backwards through menus and the Beo4 list. Long press to exit menus
completely
Beo4 operation
Your television can be operated with the Beo4 with navigation button as
described in this Getting Started and the online guide, available on
www.
bang-olufsen.com/guides
.
1
*Beo4 buttons
2
*LIST
Digital Text/MHEG
MODE settings
Some buttons can be reconfigured during the setup process. See the online guide for more information.
NOTE! For general information about remote control operation, see the guide enclosed with your remote control.
In the Beo4
LIST
, you find many of the buttons found under the button on Beo6.
Some countries and CA modules require activation of Digital Text/MHEG. Consequently, some differences apply for
Beo4. When no menu is shown on the screen, you must press
MENU
before a coloured button. See the online guide
for more information.
Check that your Beo4 remote control is in
MODE 1
. See your Beo4 online guide.
Switch on teletext
Display extra “buttons” for functions or sources in the Beo4 display. Use
or to
step in the list*
2
TV
PLAY
TV
DTV
0 – 9
STOP
MENU
BACK
TEXT
LIST
6