BeON BN-2007, Инструкция по эксплуатации

Страница: 8 / 16

8 INSTRUCTION MANUAL

Use of parts, including various containers not recommended by the manufacturer, may result in
an accident.

Do not allow the power cord to hang over the edge of the table or come into contact with hot
surfaces.

This appliance is not intended for use by persons with reduced physical, sensory or mental
capabilities (including children), or by persons who do not have sufficient knowledge or
experience with electronic appliances unless they are supervised by a person responsible for
their safety.
NOTE: the blender must not work for more than one minute at a time. Between two cycles of the
blender, you must take a break for at least one minute to allow the engine to cool down. Otherwise,
the device may fail as a result of engine overheating.
It is forbidden to try to grind too hard products with a blender, such as coffee beans, ice cubes,
nutmegs or cereals.
THE DEVICE IS INTENDED FOR HOME USE ONLY!
DEVICE DESCRIPTION
1. Submersible nozzle
2. Engine block
3. Speed button 1
4. Speed button 2
5. Bowl cober
6. Knife
7. Blender
8. Beater
9.
Glass
OPERATION OF AN ELECTRICAL APPLIANCE

Remove the device from its packaging. Before using the appliance for the first time, wash all parts that
come into contact with the product thoroughly. For more information, you can find in the section
«cleaning and care».

Major products are cut into pieces of approximately 2 cm.

Allow hot food to cool to 60°C before processing.

Before connecting the device to the network, make sure that it is properly and fully assembled.
ATTENTION:
Before you start assembling the device, make sure that it is turned off (the speed buttons are not
pressed) and is disconnected from the power supply.
MIXING PRODUCTS

You can use the blender rod to mix various products for making sauces, soups, mayonnaise, puree, baby
food, and drinks, including milkshakes.

Do not use an immersion blender to grind dry food.

Attach the blender rod to the engine compartment and turn the rod counterclockwise until it clicks.

Dip the blender rod into the ingredients to be mixed.