Remark:
(1) The defaulted temperature of period3 and period4 is the same as
period2. Please change it according to the request.
(2) When setting temperature is 00, this period is power off.
(3) How to check floor temp?
In the power on state, long press and hold then press to check floor
temp., OUT TEMP will display.
Period
Week
Weekend
Period Icon Defaulted Time Defaulted Temp.
1
2
3
4
5
6
1
2
6:00
8:00
11:30
12:30
17:30
22:00
8:00
23:00
20
℃
15
℃
15
℃
15
℃
22
℃
22
℃
15
℃
15
℃
Press to switch operation between manual mode and programmable
mode.
Display Code
Function
Setting And Options
Factory Defult
SEN
Sensor mode
0:Internal sensor
1:Floor sensor
2:Both internal sensor
and floor sensor
0
OSV
Set temp. range
for floor sensor
5-99
℃
42
℃
DIF
Precision for
floor temp.
SVH
High limit temp.
for internal sensor
5-99
℃
35
℃
SVL
Low limit temp.
for internal sensor
5-99
℃
5
℃
ADJ
Measure temp.
Check and calibrate the
actual room temp.
0.5
℃
accuracy
calibrate
FRE
Anti-frozen
00
：
Close anti-frozen
01
：
Open anti-frozen
00
PON
Power memory
00
：
Power memory off
01
：
Power memory on
00
FAC
Factory setting
10 or 32:Wifi mode open
08
：
Just display
00
：
Reset
08
7. Advanced Setting
In the state of power-off, long press and hold then press into
advanced setting mode. Then press to set relative item.
Remark:
Antifreeze function: The thermostat is in the off state. When the indoor
temperature is lower than 5 °C, the electric valve is opened. When the
indoor temperature rises to 7 °C, the thermostat automatically turns off
the output.
Sensor error:
Please select the right sensor mode. If select the different mode or there
is error of sensor, Err will display on the LCD screen, the thermostat will
stop heating till the problem is solved.
2
℃
1-9
℃
Special note:
installing cable please choose: plumbing 1.5-2.5mm2 hard wire.
M
M
M
M
0.5-3
℃
1
℃
DFI
Precision for
room temp.
IX. Phone Port Operation Instruction
1. Install APP on phone
For iOS system: Login in App Store, search “
Beok Home
”, you can
download it on your iphone.
Or scan below code to download:
For Android System: Login in Google Play, search “
Beok Home
”, you can
download it on your phone.
Or scan below code to download:
2. Connection Thermostat with Phone
Thermostat Setting
Hold on “
M
” key, then press Power key.
Go into Advanced Setting, press “
M
” key 9 times until FAC mode appears.
When FAC appears, press UP key to change from 8 to 10 or 32.
Then, press power off.
Hold on “
M
” key, then press Power key again.
At this time, wifi symbol will be twinkling quickly and frequently. It means, you can
connect thermostat with phone now.
When wifi symbol stop twinkling, it means thermostat is successfully connected with
phone.
Twinkling Quickly and Frequently:
Connection can start
Twinkling slowly:
Off Line
Twinkling Stops:
Successful Connection
Connection with Phone
Open Beok Home APP on your phone, you can see APP welcome page
M
POWER OFF STATE
POWER OFF STATE
SET TEMP
ROOM TEMP
OUT TEMP
MON TUE WED THU FRI SAT SUN
M
SET TEMP
ROOM TEMP
OUT TEMP
MON TUE WED THU FRI SAT SUN
M
SET TEMP
ROOM TEMP
OUT TEMP
MON TUE WED THU FRI SAT SUN
M
M
SET TEMP
ROOM TEMP
OUT TEMP
MON TUE WED THU FRI SAT SUN
M
