This symbol indicates that an equipotential bonding is needed for the appliance, as it is a stationary
appliance.
Safety
Intended use
The grinder is suitable only for grinding roasted coffee beans. Do not use the grinder to grind other
products or objects. It is only to be serviced by trained personnel. Any other use is not considered to
comply with intended use and can result in material damage or even personal injury. Do not make any
changes to the grinder. Neither the manufacturer nor the supplier can accept liability for any injury or
damage resulting from failure to comply with the safety information.
Safety information
WARNING!
Risk of electric shock!
Improper use, incorrect electrical installation or too high voltage can lead to electric shock. The grinder
shall be installed only by authorized, qualified personnel.
- Children are to be supervised not to play with the appliance.
- Before connecting the machine, check that electrical power supply corresponds to the specifications
on the grinder’s data plate.
- Only connect the grinder to a socket with good accessibility, allowing you to disconnect it quickly
from the power supply in the event of a malfunction.
Should the grinder’s p
lug not be compatible with
your socket, have the plug replaced with a suitable type by a qualified technician.
- Do not use the grinder if you notice any visible damage or if the power cable or plug is faulty.
- If the grinder power cable is damaged, it must be replaced by the manufacturer or by qualified
personnel in order to avoid hazards.
- If damaged, replacement of the cord shall be done by qualified and professional service.
- Connect the grinder only to a power supply with a 16 A-slow fuse. If the power connection at the
installation location of the grinder is not protected in this way, have a 16 A-slow fuse fitted by a
qualified electrician.
- Never conceal the fan grids.
- Never insert objects into the fan grids.
- Install the grinder only in locations where its use can be supervised by trained personnel.
- Do not operate the grinder above an altitude of 2,000 meters.
- Do not immerse the grinder, the power cable or the power plug in water or any other liquids.
- Do not clean the grinder with a water jet.
- Do not clean the grinder with compressed air (e.g. with a compressed air blow gun).
- Never touch the power plug with wet hands.
- Never unplug the power plug from the wall socket by pulling on the power cable; always grip the
power plug.
- Never use the power cable to carry the grinder.
- Keep the grinder and power cable / power plug away from open flames and hot surfaces.
- Do not position the power cable in such a way that it could create a tripping hazard.
- Do not bend the power cable and do not place it over sharp edges.
- Use the grinder in indoor areas only. Never operate the grinder in damp areas or in the rain.
- If you recognize there is a malfunction, switch the grinder off and remove the power plug from the
socket.