Bentone BG 550 LN, Инструкция по установке и обслуживанию

Страница: 25 / 52

25
172 505 23 08-01
7.
8.
9.
OPERATION AND ASSEMBLY INSTRUCTIONS
3(3)
7. DMV-DLE Rapid stroke ad-
justment V start
Factory setting DMV-DLE:
Rapid stroke not adjusted
1.
Unscrew the adjustment cap E
from the hydraulic brake.
2.
Turn the adjustment cap and
use as a tool.
3. Turn a-clockwise = increase
rapid stroke (+).
8. Replacing hydraulic brake
unit or adjustment plate
1.
Switch off fi ring system.
2. Remove locking varnish from
countersunk screw A.
3. Unscrew countersunkscrew A.
4. Unscrew socket headscrew B.
5.
Raise adjustment plate C or hy-
draulic brake D.
6. Remove sealing plug E
7.
Exchange adjustment plate C
or hydraulic brake D
8. Screw in countersunk and
socket head screw. Only
tighten socket head screw so
that hydraulic brake can just be
turned.
9. Coat countersunk screw A with
locking varnish.
10.
Leakage test: Pressure tap at
sealing plug 2:
DMV 507-520/11 Pressure tap
at sealing plug 3: DMV 525/11
p max. = 500 mbar.
11. Perform functional test.
12.
Switch on fi ring system.
9. Replacing the solenoid
Versions with adjusting plate
DMV-D 5.../11or hydraulic
brake DMV-DLE 5../11
1. Remove hydraulic brake or
adjusting plate as described on
page 6: ”Replacing the hydrau-
lic brake or adjusting disk”,
steps 1 - 5.
2. Replace solenoid
Important: Make sure that the
solenoid no. and voltage are
correct!
3. Remount hydraulic brake or
adjust- ing plate
as described on page 6. ”Re-
placing the hydraulic brake or
adjusting plate”, steps 7 -11.