Bentone 560000256601, Инструкция по установке и обслуживанию

Страница: 24 / 44

24 Bentone
5.2 Servicing air dampers
Removal and installation
1. Break the main current and disconnect the Euro plugs from the burner.
2. Remove the nuts (H) and pull the burner body out of the guides from
the burner fl ange.
3. Remove the air intake grille.
4. Remove the screws (N) securing the mounting plate.
5. Lift and remove the damper motor with mounting plate.
6. Lift out the air damper.
7. Clean the air damper (O) and the intake. Lubricate damper shaft and
bushing and control arm if applicable.
8. Refi t the air damper.
9. Install the damper motor with mounting plate and control arm.
10. Fit screws (N) for the mounting plate.
11. Insert the burner and tighten the nuts (H).
12. Fit the grille and turn on the mains power.
!
If the burner is directly connected, ensure that all
components on the burner are without power.
N
N
O
!
When servicing/replacing components that affect combustion, an analysis and
soot test shall be carried out on the installation.