Bentone 354012011601, Инструкция по установке и обслуживанию

Страница: 6 / 24

6
Safety instructions
• Read the manual before installation or commissioning.
• The burner may be installed by authorised personnel only.
• Check that the burner is compatible with the boiler’s output range.
• The power data on the type sign refers to the burner’s min. and max.
power.
• Check that the burner’s dimensions and capacity range are suitable for
the boiler in question.
• The electrical installation must be carried out in accordance with
applicable heavy current regulations and in a professional manner,
avoiding the risk of gas leaks, fire or personal injury.
• If any electrical connection is used other than that recommended by
Enertech, there may be a danger of damage to property and personal
injury.
• Care should be taken by the installer to ensure that no electrical
cables or gas pipelines are crushed or damaged during installation or
servicing.
• The burner must be installed so that it complies with local regulations
on electrical safety and boiler and fuel distribution.
• Check that the burner is approved for the intended grade of gas and
connection pressure.
• No safety systems on the burner may be disconnected.
• The installer must ensure that the boiler room has sufficient fresh air
ventilation as per local norms.
• Gas leak checks should be carried out on installation and servicing to
avoid a gas leak and the associated hazards and risks.
• Before servicing, shut off the fuel supply and turn off the power to the
burner.
• The surface temperature of the burner’s components may exceed
60 °C.
• Be careful when servicing: there may be a risk of pinching.
• Ensure that the burner is protected against direct spraying of water,
since it is not designed to withstand this.
• Only spare parts recommended by Enertech should be used.
• This burner cannot be used for biogas without first contacting
Enertech.
• If the boiler has a door that opens, this should be locked with a door
switch.