Safety Information
BENTON®
ICEMAN 5.0 BLE
charger is designed for charging 12V 1.2-160Ah
Lead-Acid rechargeable batteries. Do not intend to supply power to low voltage
electrical system. Do not use it for any other purpose.
WARNING! DO NOT ATTEMPT TO CHARGE A NON-RECHARGEABLE
BATTERY (PRIMARY CELLS).
Do not
use the charger with a damaged cable. It must be replaced by the
manufacturer, its service agent or similarly qualified technician in order to ensure
safety.
Normally, a battery is grounded either, on negative or positive terminal to the
vehicle’s chassis. The charger’s DC Clips are to be connected to the battery
terminal
not connected to the chassis first
. The other connection is to be made to
the terminal
connected to the chassis
, far from the battery and fuel line. The
battery charger is then to be connected to the power supply.
After charging, disconnect the battery charger from supply mains.
Remove the
chassis connection and the battery connection
, respectively. This will reduce
back drain current.
During charging the battery must be placed in a well ventilated area.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not
play with appliance. Cleaning and user maintenance shall not be made by children
without supervision.