Bentel Security Academy 4, Руководство по программированию

Страница: 10 / 32

Step 5
Enter the identifier number of the telephone number----accepted keys
through .
Step 6
Press to save the data in the
Calls
section and step to the
Event
Code
section.
PHASE 2
active----a LED will go
ON
to confirm parameter acceptance.
Step 7
Enter the 2 digit event code for the
SUPERKEY 1
event----accepted keys
through .
Step 8
Press to save the data in the
Event Code
section and step to the
Voice Message
section.
PHASE 2
active----a LED will go
ON
to confirm parameter acceptance.
Step 9
Select the voice message for the
SUPERKEY 1
event (refer to User Manual)----
accepted keys through .
+
Press for
no message
.
Step 10
Press to save the data in the
Voice Message
section and go back to
PHASE 1
Step
3
.
LED 7 will flash
----all other LEDs will be OFF.
If is pressed when
PHASE 1
is active the programming session will close.
If is pressed when
PHASE 2
is active the current parameter will not
be saved and the control panel will step back to
PHASE 1
Step
3
.
+
Press to save the parameter value.
Example 4
Parameter 1
(Keypads in configuration)----accepted keys through .
A brief description of the parameter can be found at the top of the KEY-
PADS table.
The
u
symbol at the end of the row means the parameter can be pro-
grammed in the
Single mode
only.
Parameter 131
(Call Type for telephone number 2)----accepted keys
through and .
A brief description can be found at the top of the
TELEPHONE
table.
The
î
symbol at the end of the row in the programming tables means the pa-
rameter can be programmed in both
Single mode
and
Consecutive mode
.
Parameter 290
(Clock): data entry instructions can be found at the top of
the
CLOCK
table.
The
v
symbol between the "day - month - year" and also "hour and min-
utes" sections means the parameter must be programmed in
Multi-sec-
tion mode
.
10
Security System Control panel