bensat BEN350IR, Руководство пользователя

Страница: 50 / 96

the antenna will move continuously until you press another button. Once the antenna
is positioned properly, select Command Mode and choose Save, then press OK button
to save the position. The position number will then be displayed next to the satellite
name. When you want to move the antenna to a saved satellite position, select the
satellite, choose Go To for the Command Mode and press OK button. To clear a saved
satellite position select satellite, choose Reset for the Command Mode and press
OK button.
5-1-4 Search All (BLUE button in TP Setup)/TP Search
5-1-5 Antenna Positioning
By pressing BLUE button in the TP Setup, this
mode will search all channel of the satellite without
regarding the frequency. By pressing Right( ) button
and adjusting the frequency or leave as it is, you can
search the specific channel regarding the frequency
you choose.
Antenna Positioning (DiSEqC Motor)
This mode will allow you to set the antenna position
for each satellite. In order to use antenna positioning
you must use a motor controlled by DiSEqC1.2
commands.
To move the antenna, select the desired satellite,
transponder, and step size. Then select Move Dish
and press , buttons to move the antenna West or
East. If you selected continuous for the step size,
5. Main menu
16