BENRUBI IZZY RS-966, Инструкция по эксплуатации, Страница: 17 / 23

16
Caution: Do not charge the appliance outdoors where it is in direct sunlight or in a very
hot room (Figure 1).
1. Connect the charger plug to the device and connect the charger to the socket (Figure 2).
The indicator light will illuminate.
2. Charge for 60-90 minutes. The LCD displays "99" when charging is complete.
3. When charging is completed, remove the charger from the wall socket.
Note: The operating time at full charge takes about 50-60 minutes.
4. The indicator light will turn red when the battery charge reaches below 10%. Connect the
charger plugged in to finish shaving.
Note: Do not overcharge the unit. If the device is not used for a long time (2-3 months),
unplug it from the electrical outlet and store. Fully charge the device when you want to
use it again.
Using the Appliance
• Clean the heads and the device after each use, so that it remains clean by bacteria that
are created during use.
• Do not give the device to other people in order to avoid transmission of skin
infections.
Shaving head
1. Place the shaving head (4) in the body of the appliance (Figure 3).
2. Press the on/off switch (1) (Figure 4). The LCD will light up showing "99".
3. Place the shaving head (4) on your face and gently shave (Figure 5).
4. Once finished shaving, press again the on/off switch (1). The LCD screen will turn off.
Notes:
• For best results, make sure your face is clean and dry.
• The shaving head will adjust to your face and skin after the first use.
• You can use the shaving head to shave the hair on your neck.
• Always place the razor head cap after each use to avoid damage to the heads. Do not
use the device if you notice wear on the shaving head heads because it can injure your
skin.