BENRUBI IZZY PG-100 PLUS, Инструкция по эксплуатации

Страница: 23 / 27

22
Facial trimming with precision trimmer (without cutting guide)
• Use the precision trimmer without cutting guide to trim the beard, mustache, sideburns
and remove individual hairs.
• Facial care without cutting guide results in very short hair (0.8mm).
1. Attach the precision trimmer (13) to the body of the device.
2. Turn on the device by pressing the On/Off switch (3). The indicator light (6) will turn on.
3. Gently touch the hair with the full size trimmer and take careful and controlled movements.
4. When you finish trimming, turn off the device by pressing the On/Off switch (3). The indicator
light (6) will turn off.
5. Remove the precision trimmer.
6. Clean the precision trimmer and the device before storing it (see "Cleaning & Care").
Note: You can adjust the blade height of 0.8, 1.1 & 1.4mm by moving the blade adjustment
button (2).
Facial trimming with trimmer for details
• Use the cutting head for details to trim the beard, mustache, sideburns, details and
remove individual hairs.
1. Attach the trimmer for details (14) to the body of the device.
2. Turn on the device by pressing the On/Off switch (3). The indicator light (6) will turn on.
3. Gently touch the hair with the full size trimmer and take careful and controlled movements.
4. When you finish trimming, turn off the device by pressing the On/Off switch (3). The indicator
light (6) will turn off.
5. Remove the trimmer for details.
6. Clean the precision trimmer and the device before storing it (see "Cleaning & Care").
Note: You can adjust the blade height of 0.8, 1.1 & 1.4mm by moving the blade adjustment
button (2).
Shaving with the micro-shaver
• Use the microshaver to crate smooth, well-defined contours.
• Before you use the microshaver, always check it for damage or wear. If the foil or cutter
is damaged or worn, do not use the microshaver, as injury may occur. Replace the whole
attachment before you use the microshaver again.
1. Pre-trim the contours you want to shave with the full size trimmer (1) (without cutting guide)
or the precision trimmer (13).
2. Attach the micro-shaver 15) on the body of the device.
3. Press the On/off switch (3). The indicator light (6) will turn on. Gently press the micro-shaver
onto the skin at a 45° angle and shave along the contours to remove the hairs.
Do not press
too hard!
4. When shaving is complete, press the on/off switch (3) again. The indicator light (6) will turn
off.
5. Remove the micro-shaver.
6. Clean the micro-shaver and the device before storing it (see "Cleaning and care").
Tips for better results:
• Move the device with controlled movements to shave your beard or your mustache.