33
Important safety instructions
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have
made a correct connection to the projector audio input. See
"Connecting with video equipment" on
for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press
MENU/EXIT
and then press / until the
Audio Setup
menu is highlighted.
2. Press
to
highlight
Mute
and press / to select
On
.
If available, you can also press MUTE on the remote control to toggle projector audio between on and off.
Adjusting the sound level
To adjust the sound level, press
/
on the projector or remote control, or:
1. Repeat step 1 above.
2. Press
to
highlight
Volume
and press / to select a desired sound level.
Switching the left/right audio channels
1. Repeat step 1 above.
2. Press
to
highlight
L/R Switch
and press / to select
On
to swap audio output of the left and
right speakers, or select
Auto
to automatically swap the left and right audio channels when the
projection direction is changed.
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1. Repeat step 1 above.
2. Press
to
highlight
Power On/Off Ring Tone
and press / to select
Off
.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound
level will not affect the Power On/Off Ring Tone.
