BenQ TK800M Скачать руководство пользователя | Manualshive

Страница: 13 / 48

background image

13

Positioning your projector

Mounting the projector

If you intend to mount your projector, we strongly recommend that you use a proper fitting BenQ
projector mounting kit and that you ensure it is securely and safely installed.
If you use a non-BenQ brand projector mounting kit, there is a safety risk that the projector may fall
down due to an improper attachment through the use of the wrong gauge or length screws.

Before mounting the projector

• Purchase a BenQ projector mounting kit from the place you purchased your BenQ projector.
• BenQ recommends that you also purchase a separate Kensington lock compatible security cable and

attach it securely to both the Kensington lock slot on the projector and the base of the mounting
bracket. This will perform the secondary role of restraining the projector should its attachment to the
mounting bracket become loose.

• Ask your dealer to install the projector for you. Installing the projector on your own may cause it to

fall and result in injury.

• Take necessary procedures to prevent the projector from falling off such as during an earthquake.
• The warranty doesn’t cover any product damage caused by mounting the projector with a non-BenQ

brand projector mounting kit.

• Consider the surrounding temperature where the projector is ceiling mounted. If a heater is used, the

temperature around the ceiling may be higher than expected.

• Read the user manual for the mounting kit about the range of torque. Tightening with torque

exceeding the recommended range may cause damage to the projector and subsequently falling off.

• Make sure the power outlet is at an accessible height so that you can easily shut down the projector.

Ceiling mount installation diagram

• To optimize your projection quality, we suggest doing the projection by following the values in the non-gray cells.

The values in the gray cells are for reference only.

• All measurements are approximate and may vary from the actual sizes.

BenQ recommends that if you intend to permanently install the projector, you should physically test the
projection size and distance using the actual projector in situ before you permanently install it, so as to make
allowance for this projector's optical characteristics. This will help you determine the exact mounting position so
that it best suits your installation location.

238.12

83.48

168.69

21.51

Ceiling mount screw: M4
(Max L = 25 mm; Min L = 20 mm)

Unit: mm

«
...
11
12
13
14
15
...
»

Содержание TK800M

















































Отзывы:

Нет отзывов

Похожие инструкции для TK800M

Бренд: ViewSonic Страницы: 2

Бренд: ICM Controls Страницы: 2

Бренд: BenQ Страницы: 25

Бренд: Da-Lite Страницы: 8

Christie DS+300

Бренд: Christie Страницы: 2

Бренд: ECO Spot Страницы: 4

Бренд: Dukane Страницы: 8

Бренд: B&B Electronics Страницы: 2

Бренд: Vidikron Страницы: 52

TITAN LASER WUXGA

Бренд: Digital Projection Страницы: 137

Бренд: Optoma Страницы: 67

Бренд: Optoma Страницы: 88

Бренд: Panasonic Страницы: 96

Бренд: Panasonic Страницы: 100

Бренд: Panasonic Страницы: 118

Бренд: Panasonic Страницы: 120

Бренд: Panasonic Страницы: 129

Бренд: Panasonic Страницы: 133

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды