background image

20 Operation 

 

Securing the projector

Using a security cable lock

The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a security cable 
to secure the projector. A security bar is located on the right side of the projector. See item 11 on 

page 

8

. Insert a security cable to the opening of the security bar and secure it to a nearby fixture or heavy 

furniture.
You can also purchase a lock, such as the Kensington lock, to secure the projector. There is a 
Kensington lock slot on the rear side of the projector. See item 18 on 

page 8

. A Kensington security 

cable lock is usually a combination of key(s) and the lock. Refer to the lock’s documentation for finding 
out how to use it.

Utilizing the password function

Setting a password

1.  Go to 

Advanced

 menu - 

System

 > 

Security Settings

. Press 

OK

. The 

Security Settings

 page 

appears.

2.  Highlight 

Change Password

 and press 

OK

.

3.  The four arrow keys ( ,  ,  ,  ) respectively represent 

4 digits (1, 2, 3, 4). According to the password you 
desire to set, press the arrow keys to enter six digits for 
the password.

4.  Confirm the new password by re-entering the new 

password.

5.  To activate the 

Power On Lock

 function, go to 

System

 > 

Security Settings

 > 

Power On Lock

press 

OK

 and  /  to select 

On

. Input the password 

again.

If you forget the password

If you enter the wrong password, the password error message 
will appear, and the 

Input Password

 message follows. If you 

absolutely do not remember the password, you can use the 
password recall procedure. See 

Entering the password recall 

procedure on page 21

.

If you enter an incorrect password 5 times in succession, the 
projector will automatically shut down in a short time.

• The digits being input will be displayed as asterisks on-screen. Make a note of your selected password and keep it 

in a safe place in advance or right after the password is entered so that it is available to you should you ever 
forget it.

• Once a password has been set and the 

Power On Lock

 is activated, the projector cannot be used unless the 

correct password is entered every time the projector is started.

Input New Password

Return

Password Error

Please try again.

Содержание TH690ST






















































Отзывы: