21
Operation
Entering the password recall procedure
1. Press and hold
OK
for 3 seconds. The projector will
display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode
the number. You may be required to provide proof of
purchase documentation to verify that you are an
authorized user of the projector.
Changing the password
1. Go to
Advanced
menu -
System
>
Security Settings
. Press
OK
. The
Security Settings
page
appears.
2. Highlight
Change Password
and press
OK
.
3. Enter the old password.
• If the password is correct, another message
Input New Password
appears.
• If the password is incorrect, the password error message will appear, and the message
INPUT
CURRENT PASSWORD
appears for your retry. You can press
BACK
to cancel the change or
try another password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
Disabling the password function
To disable password protection, go to
Advanced
menu -
System
>
Security Settings > Power On
Lock
, press
OK
and / to select
Off.
The message
Input Password
appears. Enter the current
password.
• If the password is correct, the OSD menu returns to the
Security Settings
page. You will not
have to enter the password next time turning on the projector.
• If the password is incorrect, the password error message will appear, and the message
INPUT
CURRENT PASSWORD
appears for your retry. You can press
BACK
to cancel the change or
try another password.
Switching input signal
The projector can be connected to multiple devices at the
same time. However, it can only display one full screen at a
time. When starting up, the projector automatically searches
for the available signals.
Be sure the
Advanced
menu -
Display
>
Auto Source
Search
is
On
if you want the projector to automatically
search for the signals.
To manually select the source:
1. Press
SOURCE
. A source selection bar appears.
2. Press / until your desired signal is selected and press
OK
.
Though the password function is disabled, you need to keep the old password in hand should you ever need to
re-activate the password function by entering the old password.
Please write down the recall code, and
contact BenQ Customer Center.
Recall Code:
CJ-2014-541638
Recall Password
Return
HDMI-1
HDMI-2
Source
