Operation
36
3.
Press
▼
to highlight
Timer Display
and choose if you want the timer to show up
on the screen by pressing
◄
/
►
.
4.
Press
▼
to highlight
Timer Position
and set the timer position by pressing
◄
/
►
.
5.
Press
▼
to highlight
Timer Counting Direction
and select your desired counting
direction by pressing
◄
/
►
.
6.
Press
▼
to highlight
Sound Reminder
and decide if you want to activate sound
reminder by pressing
◄
/
►
. If you select
On
, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7.
To activate the presentation timer, press
▼
and press
◄
/
►
to highlight
On
and
press
MODE/ENTER
.
8.
A confirmation message appears. Highlight
Yes
and press
MODE/ENTER
on the
projector or remote control to confirm. You will see the message “
Timer is On
”
appearing on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the
System Setup: Basic > Presentation Timer
menu and highlight
Off
.
Press
MODE/ENTER
. A confirmation message appears.
2.
Highlight
Yes
and press
MODE/ENTER
to confirm. You will see the message
“
Timer is Off
” appearing on the screen.
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging
function. See
"Connection" on page 19
for details.
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing
PAGE +/PAGE -
on the
remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft
®
Windows
®
98 operating system.
Windows
®
XP or higher operating systems are recommended.
Selection
Description
Always
Displays the timer on screen throughout the presentation time.
3 min/2 min/1 min
Displays the timer on screen in the last 3/2/1 minute(s).
Never
Hides the timer throughout the presentation time.
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decreases from the preset time to 0.
