Basic operations
23
Setting up the Internet connection
Your display must be connected to a network to conduct OTA updates or surf the
Internet.
Network setting
Follow the steps below to configure the wired network settings for the display.
1. Connect the display to a local network via an RJ45 cable.
2. On the main screen, select
Settings
.
3. Go to
Network & Internet
>
Ethernet
.
- If you are in a DHCP environment, enable
Ethernet
and the display will be
connected to the Internet automatically.
- If you are in a non-DHCP environment, enable
Static IP
and then manually set the
IP Address, Gateway, Netmask, DNS 1 and DNS 2.
To find the MAC address in operating system of the display, please go to
Settings
>
System
>
About
>
Status
.
