BenQ ST4301K, Руководство по установке

Страница: 6 / 29

6
CR 0x0D
Set-function listing
The PC can control the LCD Monitor for specific actions. The Set-Function command allows you to
control the LCD monitor behavior in a remote sit through the RS232 port. The
Set-Function packet format consists of 11 bytes.
Set-function description
Item Description
Length Total Bytes of Message excluding "CR"
Display ID Identification for each of display
Display ID is
“
01
”
for LAN control
Command Type
Identify command type, "s"
(0x73h): Set Command
Command Function command code: One byte ASCII code
Value [1~3] Three bytes ASCII that defines the value
CR 0x0D
Set-function format
Send: (Command Type="s")
Name Length ID
Command
type
Command Value1 Value2 Value3 CR
Byte count 1 Byte 2 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte
Bytes
order
1 2~3 4 5 6 7 8 9
Reply: (Command Type="+" or "-")
Name Length ID
Command
type
CR
Byte count 1 Byte 2 Byte 1 Byte 1 Byte
Bytes
order
1 2~3 4 5
Example 1: Set Brightness as 76 for Display-02 and this command is valid.
Send (Hex Format)
Name Length ID
Command
type
Command Value1 Value2 Value3 CR