BenQ SC3211, Руководство пользователя

Страница: 16 / 45

13
E
N
G
LIS
H
Using your remote control
Power on and off
Make sure that the TV power cable has been plugged into a wall power outlet, and the
outlet has been switched on (if there is a switch).
Power on the TV
When TV is plugged into a outlet, the power indicator will light up orange, which
indicates the TV is in off mode. Press POWER
once on the remote control, and the
TV will turn on with the power indicator light turning into green.
Put the TV to off mode
Press POWER again on the remote control, and the TV will enter into the off mode
with the power indicator light turning into orange.
Switch inputs
1. Turn on all connected equipments or devices before selecting an input.
2. Press the INPUT button on the remote control to display signal input interface (as
shown below).
TV
AV 1
AV 2
S-Video
YPbPr
HDMI1
HDMI2
PC
MEDIA
3. Continue to press the INPUT button to circulate the signal input, or press the

/

and OK buttons to select the signal source.
Adjust the audio settings
Adjust the volume
Press VOL + on the TV, • or VOL+ on the remote control to raise the volume. An
volume bar will be shown on your screen and increased in its length as you raise the
volume.
Press VOL - on the TV, • or VOL- on the remote control to lower the volume. An
volume bar will be shown on your screen and decreased in its length as you lower the
volume.
Mute Setting
Press MUTE once on the remote control to turn off the audio temporarily. Press
MUTE again, or press VOL+ to restore the audio output.
Select TV/Video sound mode
When watching TV, you can press the Sound Mode button on the remote control to •
switch to "Standard", "User", "Movie" or "Dynamic" modes.
The available options will be depend on what your local TV system or your Video input
provides.