Basic operations
24
setup screens. Follow the on-screen instructions or the steps below to start up your
display and complete the initial setup.
1. Turn on the display. Wait for the display to boot up with the BenQ screen. This may
take a moment.
2. Tap
Next
on the screen to begin. Follow the on-screen instructions to set up the
language, date and time, and network. Or your can skip some of these steps and
complete the setup later.
Switching input signals
To select an input signal do either one of the following:
• Press the
INPUT
button on the remote control.
• Press the
Menu
button on the front panel.
• Drag the
General Setting
menu up from the bottom-center of the screen.
Downloading software
BenQ may periodically release software updates that may add functions or applications
associated with your display. To check if there is a software update available for your
device or to obtain the software license key, please visit http://DSdownload.BenQ.com.
Then enter the serial number (can be found on the sticker attached on the back of the
display) and click
OK
to access the Software download page.
• The RP750K
General Setting
also features an HDMI4 input for 4K2K resolution.
• The users can enable the
Eye Care
function on the OSD menu.
Eye Care
switches the
display low blue light mode and activates the flicker free function. In
Eye Care
mode, the
default value of
Brightness
and
Contrast
both are 50 and the default value of Backlight is
10.
