background image

Operation

23

the password recall procedure. See 

"Entering the password recall procedure" on page 23

 

for details.

If you enter an incorrect password 5 times in succession, the projector will automatically 

shut down in a short time.

Entering the password recall procedure

1.

Press and hold 

AUTO

 on the projector or 

remote control for 3 seconds. The 
projector will display a coded number on 
the screen.

2.

Write down the number and turn off your 
projector.

3.

Seek help from the local BenQ service 
center to decode the number. You may be 
required to provide proof of purchase 
documentation to verify that you are an 
authorized user of the projector.

Changing the password

1.

Open the OSD menu and go to the 

SYSTEM SETUP: Advanced

Security 

Settings

 > 

Change Password

 menu.

2.

Press 

MODE/ENTER

. The message 

“INPUT CURRENT PASSWORD”

 

appears.

3.

Enter the old password.

i. If the password is correct, another message 

“INPUT NEW PASSWORD”

 

displays. 

ii. If the password is incorrect, the password error message displays lasting for 

three seconds, and the message 

“INPUT CURRENT PASSWORD”

 displays 

for your retry. You can press 

MENU/EXIT

 to cancel the change or try another 

password.

4.

Enter a new password.

IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down 

here in this manual in advance or right after the password is entered so that it is available to you should you 

ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.

5.

Confirm the new password by re-entering the new password.

6.

You have successfully assigned a new password to the projector. Remember to enter 
the new password next time the projector is started.

7.

To leave the OSD menu, press 

MENU/EXIT.

Disabling the password function

To disable password protection, go back to the 

SYSTEM SETUP: Advanced

 > 

Security Settings > Change Security Settings

 menu after opening the OSD menu 

system. Press 

MODE/ENTER. 

The message 

“INPUT PASSWORD”

 displays. Enter 

the current password. 

i. If the password is correct, the OSD menu returns to the 

Security Settings

 

page.

Please write down the recall code,
and contact BenQ
Customer Center.

Recall Code:

255   255   255   255

RECALL PASSWORD

Exit

MENU

Содержание MW821ST





























































Отзывы: