Operation
40
Setting the presentation timer
The presentation timer can indicate the
presentation time on the screen to help you
achieve better time management when giving
presentations. Follow these steps to utilize this
function:
1.
Press
Timer Set up
on the remote control
or go to the
SYSTEM SETUP: Basic >
Presentation Timer
menu and press
MODE/ENTER
to display the
Presentation Timer
page.
2.
Highlight
Timer Period
and decide the timer period by pressing
/
. The
length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to
240 minutes in 5-minute increments.
3.
Press to highlight
Timer Display
and choose if you want the timer to show
up on the screen by press
ing
/
.
4.
Press to highlight
Timer Position
and set the timer position by pressing
/
.
Top-Left
Bottom-Left
Top-Right
Bottom-Right
5.
Press to highlight
Timer Counting Direction
and select your desired
counting direction by pressing
/
.
6.
To activate the presentation timer, press and press
/
to select
On
and
press
MODE/ENTER
.
7.
A confirmation message displays. Highlight
Yes
and press
MODE/ENTER
to
confirm. The timer starts counting at the time the timer is on.
Selection
Description
Always
Displays the timer on screen throughout the presentation time.
3 min/2 min/1
min
Displays the timer on screen in the last 3/2/1 minute(s).
Never
Hides the timer throughout the presentation time.
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decrease from the preset time to 0.
